Home > Heat Exchanger Tubes >

ASTM A213 Alloy Steel Seamless Pipe Large Diameter Thick-Wall Boiler Tube for Heat Exchangers

Product Categories

TORICH INTERNATIONAL LIMITED

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

ASTM A213 Alloy Steel Seamless Pipe Large Diameter Thick-Wall Boiler Tube for Heat Exchangers

Name: ASTM A213 Alloy Steel Seamless Pipe Large Diameter ThickWall Boiler Tube for Heat Exchangers
Brand: Torich
Price: 800 USD

Buy cheap ASTM A213 Alloy Steel Seamless Pipe Large Diameter Thick-Wall Boiler Tube for Heat Exchangers product

Application : Boiler

Outer diameter(round) : 30 - 325 mm

Price : 800-1000 USD/Ton

Supply Ability : 60000 Ton/Tons per Year

Grade : T2 T5 T9 T12 T22

MOQ : 1Ton

Payment Terms : L/C,D/A,D/P,T/T,Western Union

Delivery Time : 20-30days upon products

Packaging Details : In bundles or in wooden boxes.

Length : 6M or as requirement,As customer's require,8m,5.8m,2.5-8m

Section shape : Round,Rectangular

Thickness : 2 - 50 mm,

Special pipe : Thick Wall Pipe,API Pipe,Precision steel tube,precision seamless pipe,cold drawn

Standard2 : ASTM A53-2007,DIN 2391,API 5L,ASTM A106-2006,DIN 17175

Brand Name : Torich

Place of Origin : Zhejiang/China

Model Number : Alloy Steel Seamless Pipe

Certification : ISO9001 ISO 14001 TS16949

Contact Now

ASTM A213 Alloy Steel Seamless Pipe Large Diameter Thick-Wall Boiler Tube for Heat Exchangers

ASTM A213 Alloy Steel Seamless Pipe (Tube) — Large Diameter, Thick-Wall for Boiler Service

Material

ASTM A213/A213M covers seamless ferritic and austenitic alloy-steel tubes intended for boilers, superheaters, and heat exchangers. Tubes are supplied as hot-finished or cold-finished, and can be specified with the heat-treatment condition required for high-temperature pressure parts. (Reference: ASTM A213/A213M)

Specifications

Manufacturing: Seamless; hot-finished or cold-finished (as specified). (Reference: ASTM A213/A213M)
Size capability (typical per standard scope): tubing commonly furnished from 1/8 in. ID to 5 in. OD with minimum wall 0.015–0.500 in.; other diameters may be supplied by agreement. (Reference: ASTM A213/A213M)
Testing options: Each tube is subject to hydrostatic test or nondestructive electric test; method is manufacturer’s option unless the PO specifies otherwise. (Reference: ASTM A213/A213M)
Marking: Includes hot-finished/cold-finished condition and wall designation (minimum wall or average wall). (Reference: ASTM A213/A213M)
Purchaser ordering checklist (recommended to avoid ambiguity): quantity, material name (seamless tubes), grade, condition, heat-treatment type, and any special requirements. (Reference: ASTM A213/A213M)

Key Features

High-temperature strength & creep resistance for boiler and superheater duties (Cr-Mo and higher-Cr families available).
Reliable pressure integrity from seamless manufacture and controlled heat treatment.
Fabrication-ready: suitable for expanding/beading, forging, welding, and bending when properly processed; Cr-bearing ferritic grades may require suitable post-heat treatment after hot work/welding. (Reference: ASTM A213/A213M)

Our Advantages

“Can you provide full traceability and a complete documentation package?”
Yes—deliveries are supported with CMTRs and a documentation set aligned with what major power/utility purchasers request (CMTRs, ISO certificate, inspection reports, wall thickness report, and NDT reports when applicable). (Reference: typical boiler-tubing purchaser QA requirements)
“How do you control minimum wall thickness on thick-wall orders?”
We implement wall verification practices consistent with strict buyer QA expectations—sampling by lot/heat, multi-point end measurements, and reject/containment rules when readings fall below the minimum wall requirement. (Reference: typical boiler-tubing purchaser QA requirements)
“Which NDT do I get—hydro or eddy-current—and can I mandate it?”
ASTM A213 allows hydrostatic or nondestructive electric testing on every tube; your PO can specify the required option. We can also support additional purchaser-requested examinations (e.g., eddy current sampling and reporting) commonly referenced in boiler-tubing QA programs. (Reference: ASTM A213/A213M)

Chemical Composition

Grade	C	Mn	P (max)	S (max)	Si	Cr	Mo
T2	0.10–0.20	0.30–0.61	0.025	0.025*	0.10–0.30	0.50–0.81	0.44–0.65
T5	0.15 (max)	0.30–0.60	0.025	0.025	0.50 (max)	4.00–6.00	0.45–0.65
T9	0.15 (max)	0.30–0.60	0.025	0.025	0.25–1.00	8.00–10.00	0.90–1.10
T12	0.05–0.15	0.30–0.61	0.025	0.025*	0.50 (max)	0.80–1.25	0.44–0.65
T22	0.05–0.15	0.30–0.60	0.025	0.025	0.50 (max)	1.90–2.60	0.87–1.13

Mechanical Properties

Grade	Tensile Strength min	Yield Strength min	Elongation min	Hardness (max)
T2	60 ksi [415 MPa]	30 ksi [205 MPa]	30%	163 HBW / 170 HV; 85 HRB
T5	60 ksi [415 MPa]	30 ksi [205 MPa]	30%	163 HBW / 170 HV; 85 HRB
T9	60 ksi [415 MPa]	30 ksi [205 MPa]	30%	179 HBW / 190 HV; 89 HRB
T12	60 ksi [415 MPa]	32 ksi [220 MPa]	30%	163 HBW / 170 HV; 85 HRB
T22	60 ksi [415 MPa]	30 ksi [205 MPa]	30%	163 HBW / 170 HV; 85 HRB

Applicable Standards

ASTM / ASME: ASTM A213/A213M (ASME SA-213 for BPVC applications).
EN: EN 10216-2 (seamless tubes for pressure purposes, elevated-temperature alloy steels); EN 10216-5 (stainless tubes for pressure purposes).
GOST: GOST 8731 (technical requirements for seamless hot-finished tubes) + GOST 8732 (range of sizes for seamless hot-worked pipes) are commonly referenced for seamless tube/pipe supply.
JIS: JIS G 3462 (alloy steel tubes for boiler and heat exchanger service).
GB: GB/T 5310 (seamless steel tubes and pipes for high pressure boiler).

Application Fields

Power generation & industrial boilers: water-wall tubes, superheater/reheater tubes, economizer tubing, air-preheater tubing.
Petrochemical & refining heat transfer: heat exchanger and condenser tube bundles; process heat recovery.
High-temperature pressure parts: thick-wall alloy tubing used where elevated-temperature strength and oxidation resistance are required (grade selection depends on design temperature/pressure).

ASTM A213 Alloy Steel Seamless Pipe Large Diameter Thick-Wall Boiler Tube for Heat Exchangers

Q: Are you trading company or manufacturer ?

A: manufacturer,also can do trading.

Q: How long is your delivery time?

A: Generally speaking,it is 10-15 days if the goods are in stock,or it is 30-40 days if the goods are not in stock,

it is according to quantity.

Q: Do you provide samples? is it free or extra ?

A: Yes, we could offer the sample for free charge but need pay the cost of freight.

Q: What is your terms of payment ?

A: Payment<=2000USD, 100% in advance. Payment>=2000USD, 30% T/T in advance ,balance before shippment.

If you have another question, pls feel free to contact with me.

Product Tags: